2017.11.12-16 DigiM is invited to give a talk at 2017 American Association Pharmaceutical Scientist Annual Meeting, San Diego, CA, where DigiM will exhibit (Booth #3011). Visit our virtual exhibition.
2017.10.19-20 DigiM will exhibit at 7th Partnerships Opportunities in Drug Delivery (PODD), October 19-20, 2017, at the Marriott Copley Place, Boston, MA, USA.
2017.10.09-11 DigiM will exhibit at 2017 SPE Annual Technical Conference and Exhibition (ATCE), 9-11 October, 2017 in Henry B. Gonzalez Convention Center, San Antonio, Texas, USA, booth #733 (Map It!: Click here)
2017.09.27-28 DigiM and Whiting Oil & Gas are invited to present its relative permeability and capillary pressure work on tight reservoirs at a joint symposium by Rocky Mountain Association of Geologists and Denver Well Logging Society titled “Geology and Petrophyysics of Unconventional Mudrocks, 2017”, September 27-28, 2017, Golden, CO
2017.07.24-26 World-renowned petrophysicist Alan Byrnes will present at 2017 URTeC (Unconventional Resources Technology Conference, July 24-26, 2017, Austin, Texas) on a joint project between Whiting Oil & Gas Corporation and DigiM, where DigiM will exhibit, Booth 931. Check out LinkedIn highlights with AAPG President-Elect, Ms. Denise Cox.
2017.07.16-19 DigiM presents and exhibits at 2017 Annual Meeting of Controlled Release Society in Boston, Booth 508. During this conference, DigiM will present a poster on the subject of "Correlative focused ion beam scanning electron microscope and x-ray micro-computed tomography imaging on multi-scale drug release characterization and 3D-printing manufacturing", poster #128, on Monday, July 17, 2017, 3:30pm. Dr. Zhen Liu from Merck will present a joint poster on the subject of "Advanced Image Characterization and Analysis on Polymer Based Implantable Dosage Formulations". DigiM will also present at the first CRS soapbox presentation, on Monday, July 17, 2017, at 12:35pm. Check out LinkedIn highlights, with first multi-color 3D printed controlled release membrane model.
2017.05.28-06.01 DigiM co-presents with Automobile Fuel Cell Research at 231st ECS (The Electrochemical Society) Meeting, where DigiM will exhibit at booth 304. Check out the ECS 2017 meeting program. AFCC/DigiM abstract to be presented at 8:40AM on Monday, May 29, in Prince of Wales, Hilton New Orleans Riverside, in session F03:Multiscael Modeling, Simulation and Design. Also check out Dr. Putz's post-event article with photo.
2017.05.04 DigiM co-presents with Merck AAPS Webinar on 3D Micro-imaging for Drug and Delivery System Characterization.
2016.11.27-12.1 DigiM co-presents and exhibits (booth #1121) technologies and applications on ash characterization and filter performance prediction at MRS 2016 Fall Meeting, Boston, Massachusetts, USA. Visit our virtual exhibition.
2016.11.13-17 DigiM presents (#02W0900) and exhibits (booth #1850) applications on drug micro-characterization and release prediction at AAPS 2016 Annual Meeting and Exposition, Denver, Colorado, USA. Visit our virtual exhibition.
2016.10.18 DigiM is featured in Professor Patrick Marsac’s talk on spray drying product characterization, presented at Paint Technology Workshop 2016, University of Kentucky. (Click to download workshop agenda).
2016.10.17. DigiM website 2.0 is online.
2016.07.22. DigiM participates Microscopy and Microanalysis 2016, Columbus, OH, USA.
2016.07.11. DigiM exhibits at 3DMS in
Chicago to show case solution in metallic material imaging,
structural property characterization.
2016.05.17. DigiM exhibits at 2016 AAPS National Biotechnology Conference, delivers poster presentation "DigiMedicine: FIB-SEM/MicroCT 3D imaging for drug microstructure and deliverability characterization" and hosts BioTalk lunch round-table.
2016.04.18. DigiM exhibits and delivers invited talk "Advances in solid state imaging of pharmaceutical systems" at 51st AAPS Arden Conference: Contemporary perspectives on developing amorphous pharmaceuticals.
2015.12.04. DigiM exhibits at 2015 MRS Fall Meeting.
2015.09.30. DigiM works with clients titled "Primary and Secondary Organic Matter Habit in Unconventional Reservoirs" is accepted to publish in AAPG Memoir 102: Imaging Unconventional Reservoir Pore Systems.
2015.08.20. DigiM I2S extends support on the computation of porosity, porosity REV, electrical conductivity, and elasticity using microstructure images.
2015.06.20. DigM I2S is online with support on DigiM Porosimetry, the first numerical simulation engine to accurately compute the primary drainage and imbibition process with direct visualization.
2015.05.31. DigiM represents client at AAPG, Denver, CO, USA
2014.11.17. DigiM represents client at ANU Digital Core Consortium, Canberra, Australia.
2014.08.06. DigiM participates Microscopy and Microanalysis 2014, Hartford, CT, USA.
2014.07.11. DigiM enters agreement with University of Southern California on collaborative work in peta-scale porous flow computing.
2014.06.16. DigiM website 1.0 is online.
2014.06.16. DigiM Solution LLC is founded in Boston, Massachusetts, United States.